Acetic Acid 99.8% for HPLC & Spectroscopy

Formula: CH₃COOH
Molar mass: 60,052 g/mol
Density: 1,05 g/cm³
Boiling point: 117,9 °C
Melting point: 16,6 °C

Acetic Acid 99.98% is a high-purity, clear, and corrosive liquid commonly employed as a solvent and mobile phase modifier in HPLC and spectroscopic analyses. It provides low UV absorbance and reliable, consistent performance in various analytical procedures.

Description

Acetic Acid 99.8% HPLC Product identifier
Trade name: ACETIC ACID 99.8% FOR HPLC & SPECTROSCOPY

Classification of the substance or mixture
Flammable Liquids 3 H226 Flammable liquid and vapor.
Skin Corrosion 1A H314 Causes severe skin burns and eye damage. Eye Damage 1 H318 Causes serious eye damage.
Sensitization – Skin 1 H317 May cause an allergic skin reaction.
· Label elements
·
GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).

Signal word Danger
· Hazard-determining components of labeling:
Acetic Acid, Glacial
Hazard statements
Flammable liquid and vapor. 2 Hazard(s) identification

Acetic Acid 99.8% HPLC Identification
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Mixture of the substances listed below with nonhazardous additions.
· Dangerous components:
CAS: 64-19-7
Acetic Acid, Glacial
99.8% Min
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.

Acetic Acid 99.8% HPLC Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. – No smoking. Keep container tightly closed.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.
Take precautionary measures against static discharge. Do not breathe dusts or mists.
Wash thoroughly after handling.
Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. If swallowed: Rinse mouth. Do NOT induce vomiting.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a poison center/doctor. Specific treatment (see on this label).
If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
In case of fire: Use CO2, powder or water spray to extinguish. Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 – 4)
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.

Acetic Acid 99.8% HPLC Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Advice for firefighters
Protective equipment: Mouth respiratory protective device.
Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system. Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Use neutralizing agent.
Dispose contaminated material as waste according to section 13. Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment. See Section 13 for disposal information.
*
Acetic Acid 99.8% HPLC Fire-fighting measures
*
Description of first aid measures
General information: Immediately remove any clothing soiled by the product.
After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing: Drink copious amounts of water and provide fresh air. Immediately call a doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed No further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available. 4 First-aid measures

Acetic Acid 99.8% HPLC Accidental release measures

· Protective Action Criteria for Chemicals
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep ignition sources away – Do not smoke. Protect against electrostatic charges.
Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:

Reviews

There are no reviews yet.

Be the first to review “Acetic Acid 99.8% for HPLC & Spectroscopy”

Your email address will not be published. Required fields are marked *